Bathtub Faucet Extender Ideas

0

Bathtub faucet extender – After continued use, a tub spout, and errors in three ways diverter becomes worn or clogged, threads or tapered edges of the pipe break or pips finish can chip away. There are two basic types of spouts and it is important to identify what kind you have. If a screw on the underside of the crane, it is a slip-on. A crane absent of a set screw is a screw on the spout. It is possible to complete the job with a few basic tools and will save money instead of hiring a professional.

Locate the mounting screw on the underside of the bathtub faucet extender. Remove the screw with an Allen wrench and pull the spout of the copper pipe that extends from the wall. Start spout with hand in a counterclockwise direction. If it is difficult, place a cloth over the valve and release the rest of the way with slip-joint or channel-lock pliers. The cloth will prevent damage from tongs.

Bathtub faucet extender, for the new spout on the tip of the copper pipe. Tighten the mounting screw on the underside of the tap with a hex wrench. Make sure it is tight. Remove old spout by turning it counterclockwise opportunity with pliers. Place a rag over the faucet to prevent damage. Cut the end of the tube fitting extending from the wall if it is copper and has a threaded or tapered mating with a tubing cutter. Copper is easier to cut than steel and cut the tapered end of the help suitable.

Share.

Comments are closed.