DIY Molding White Shaker Kitchen Cabinets

0

White shaker kitchen cabinets – Shaker style is based on the shaker to produce aesthetic quality of furniture with very simple lines. This is translated into popularity for furniture and cabinets that embodies this aesthetic. Modern Shaker-style kitchen cabinet doors have simple flat surfaces with a box frame detail. The body of the door is just wood. The front door has a simple frame corresponding to the outer edges. The frame is also straight wood. This is the current version of the Shaker-style kitchen cabinet door. This look can be created by most homeowners without problems.

Wash the doors and cabinet directed the white shaker kitchen cabinets to remove dirt and grease. Use a mild detergent and water. Screw the door by the removal of the hinges of both the door and the cabinet with a screwdriver. Unscrew the hardware and set it aside. Sand the door with the medium-grit sandpaper to the finish line, with the aid of an orbital sander. An orbital sander has a motion to prevent scratches when sanding wood surfaces.

Measure the height of the door. Cut two pieces of this length with a table of 1/2-by-3-inch board saw. Application carpenter glue on the broad side of a board. Place the plate vertically, so that the outer edges align with the outer edges of the door white shaker kitchen cabinets. Measure between the two vertical plates.

Share.

Comments are closed.