Make a Drop Leaf Kitchen Table

0

Drop leaf kitchen table – A drop-leaf table is an extendable table that can be used for a small dinner gathering or a large dinner party. The extensions are often added by removable pieces that hang on the table side ends. A drop-leaf table can be rather expensive when purchased in stores, as it is a practical and functional table. However, you can build a drop leaf kitchen table for your kitchen or dining room with a few woodworking supplies and tools from the local hardware store.

To make a drop leaf kitchen table. Put the timber down on a flat surface and use a pencil and tape measure to draw four legs, each measuring 30 inches by 2 inches by 2 inches.  Set plywood piece down and use pencil and tape measure to create tabletop. The cutting of the nine wooden pieces with a table saw. Splinter and cracks appear, then use sandpaper to smooth sides and surfaces of lumber and plywood. Paint or stain each piece as desired with a brush. Let all the pieces dry overnight.

Place two supporting pieces on their 2-inch side and make two marks spread 10 inches apart on each of them. Set a table leg on a flat surface so that it stands straight up in the air. Placing one of the support pieces on a flat surface so that it is perpendicular to the leg.  Connect the table leg to the supporting piece by drilling two of the 3-inch long screws in the drop leaf kitchen table leg, so that the screws extend to the supporting piece.

Share.

Comments are closed.